S100 D9975-2190

Transparent Colour refresher for black engine parts, plastics, etc.

 S100 Colour refresher is a transparent colour refresher for quick, easy and lasting optical refurbishment of sun-bleached surfaces, such as black engine blocks, painted or unpainted metal parts and plastic parts. The product is temperature stable, dries with an even finish, and will withstand drives through rain and even several washes.

Content: 300 ml

Hazardous substance labeling:

Signal word:

• Danger

Hazard statments:

• H222-H229 Extremely flammable aerosol. Container is under pressure: may burst if heated.
• H315 - Causes skin irritation H336 May cause drowsiness or dizziness.
• H411 ​​Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 - If medical advice is needed, have container or label at hand.
• P102 - Keep out of the reach of children.
• P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition - No smoking.
• P211 - Do not spray on an open flame or other ignition source.
• P251 - Do not pierce or burn, even after use.
• P260 - Do not breathe aerosol.
• P271 - Use only outdoors or in a well-ventilated area.
• P410+P412 - Protect from direct sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F.
• P501 - Dispose of contents / container in accordance with local / regional / national / international regulations

Other hazards:

• Results of PBT and vPvB assessment
• PBT: Not applicable
• vPvB: Not applicable

Hazardous ingredients:

• Naphtha (petroleum), hydrotreated light: CAS: 64742-49-0 EC number: 921-024-6 Reg.nr .: 01-2119475514-35: Flam. Liq. 2, H225; Asp. Tox. 1, H304; Aquatic Chronic 2, H411; SkinIrrit. 2, H315; STOT SE 3, H336; Weight fraction: 25-50%
• Butane: CAS: 106-97-8 EINECS: 203-448-7: Flam. Gas 1, H220; Press. Gas (Comp.), H280; Weight fraction: 20- <25%
• Propane: CAS: 74-98-6EINECS: 200-827-9: Flam. Gas 1, H220; Press. Gas (Comp.), H280; Weight fraction: 20- <25%