Suomy MR Jump Jackpot мотошлем для мотокросса и эндуро

Купить Suomy MR Jump Jackpot мотошлем для мотокросса и эндуро
33 024 Р
Код артикула:
Размер:
шоу-рум в Москве =>0 штук
  • ! самовывоз/доставка сегодня !
склад поставщика =>В наличии
  • ! немного подождать, но зато дешевле !
Товар с выбранным набором характеристик недоступен для покупки
IMG_7289
IMG_7295
IMG_7296
IMG_7280
IMG_7281
IMG_7294
IMG_7291
IMG_7286
IMG_7290
IMG_7336
IMG_7337
IMG_7338
IMG_7341
IMG_7342
IMG_7343
IMG_7346
IMG_7282
IMG_7208
IMG_7212
IMG_7213
IMG_7214
IMG_7215
IMG_7217
IMG_7218
IMG_7219
IMG_7222
IMG_7223
IMG_7224
IMG_7225
IMG_7226
IMG_7227
IMG_7228
IMG_7231
IMG_7232
IMG_7233
IMG_7234
IMG_7236
IMG_7238
IMG_7240
IMG_7242
IMG_7243
IMG_7246
IMG_7247
IMG_7248
IMG_7249
IMG_7250
IMG_7274
IMG_7275
IMG_7278
IMG_7279
IMG_7283
IMG_7284
IMG_7285
IMG_7287
IMG_7288
IMG_7292
IMG_7293
IMG_7297
IMG_7298
IMG_7299
IMG_7300
IMG_7301
IMG_7302
IMG_7303
IMG_7304
IMG_7305
IMG_7306
IMG_7307
IMG_7322
IMG_7323
IMG_7324
IMG_7325
IMG_7326
IMG_7327
IMG_7328
IMG_7329
IMG_7330
IMG_7331
IMG_7332
IMG_7333
IMG_7335
IMG_7339
IMG_7340
IMG_7344
IMG_7345
IMG_7347
95% заказов приезжает в срок около 2х недель. Если вам нужно срочно, то нужно рассматривать товары в наличии в шоу-руме.
Нет. Товары выкупаются у поставщика под клиента.
Да. Вам придется оплатить транспортные расходы за отправку товара поставщику.
Нет. Для заказа достаточно аванса в размере 10-15%. Остальное оплачивается при получении.
  • MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
  • Shell in TRICARBOCO material, produced in two sizes (M and L), mix of Kevlar, carbon and fiber, joint through resin. 
  • Internal polystyrene in 3 sizes (S , M and L) to get the best fitting with variable density as per the size.
  • Homologations ECE 22-05
  • The D-RING RETENTION SYSTEM has been designed and patented by Suomy. 
  • Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. 
  • After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test.
  • If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab.
  • The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs.
  • To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
  • CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
  • INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. 
  • The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. 
  • INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
  • Wicks sweat away from the body.
  • Keeps the user fresh, dry and comfortable.
  • Lightweight, soft and breathable fabric.
  • Performance verified and certified by ADVANSA.
  • The SHELL is in polystyrene with channels for air flows.
  • In the front part there are upper and back air ventilations, which help the internal helmet ventilation.
  • On the CHIN GUARD there is an air ventilation for the front ventilation.
  • The OUTER SHELL has ribs to channel better the air flows.
  • The PEAK has an aereodynamic impact. 
  • The wide open space in the front allows the use of any kind of glasses.
Размер XS (53/54), S (55/56), M (57/58), L (59/60), XL (61/62), XXL (63/64)
Пол мужской
Производитель suomy
Категория мотошлемы мотокросс и эндуро
Рекомендуем посмотреть